Tag Archives: Ender3

3D Printing Projects 202002 – TUSH on TRON

Posted on by
Reply
Remixed TUSH rollers for TRONzilla. Outside fins to hold spool intact, clips for 40×40 extrusion, and 3 mm assembly screws with nut indent for wrench-less tightening.

The Ultimate Spool Holder (TUSH) was adapted for supporting the direct drive conversion of TRONzilla. The project started by printing a superstructure mounted on TRONzilla using the 40×40 extrusion profile (These large 40×40 sections were printed on TRONzilla). Clips were added to hold the roller assembly in place. The friction is enough so the top needs no teeth like the original TUSH. The rollers can be slid easily along the extrusion and the weight of the spool and friction of the clips keep them to the proper spacing. Screws were added to the bearing spindles to keep the halves together and made symmetrical with a hex indent to hold the nut so only a hex driver is required for tightening. The spool rolls so easily it was necessary to add larger flanges to the outside half to keep the spool on top of the rollers as it wanted to spin out of its cradle. The extrusion profile was imported in to SolidWorks and then using the sweep function developed in the bracket you see. The TUSH model was adapted with engagement fingers in to the grooves of the extrusion profile. The original TUSH has a flat gear for setting the spacing of the spool rims. By adding a captive nut pocket the bearings are trapped more securely with a 3mm screw and nut and then the TUSH can just be slid along the profile to adjust for differing spool spacing. The extrusions were sliced in Simplify3D and printed in PLA on TRONzilla. The TUSH components were sliced in Simplify3D and printed in PLA on “Groot”, an Ender3. 

 

3D Printing Projects 202003 – Mask Clips Print Farm Style

Posted on by
Reply
Grumpy showing off the recently installed glass plate. Healthcare worker demonstrates comfort and better fitting system for masks.

THE STORY

Healthcare workers ran across this article on Facebook and inquired about the possibility of printing them locally. Finding the file on Thingiverse and after a quick test print on “Groot” the go ahead was given for 150 copies. The nine Ender3’s were called into action printing 5-up at a time to crank out 200 in the space of a couple of days. PLA was used in multiple colors. A yardstick was recycled and 3D printed end pieces in ABS made it easy to keep track of production by counting the color bands. A single lime green strap marked the 100 position. 

The inspiring Facebook article and the resulting initial lot of 150.

THE REST OF THE STORY

After removing so many clips from both glass plates and polymer skins some embellishments were conceived. TinkerCAD to the rescue. A name was embossed as well as a little dent in the bottom surface for easy removal.The tweaks were then exported and re-sliced in Simplify3D.

Here’s a shot of the Ender3 “Printer Farm” in action.

Ender3’s busy printing Surgical Mask Clips in TN, Suigin, Grumpy, Chewy, Bob Ross, Rocket, The Plastics. Groot, Kermit, and Ms. Kiesha not in this photo.